PROJECT OVERVIEW
Steel Structure Chicken Coop
CHICKEN FARM CONSTRUCTION
JUHE offers a global “turnkey” solution, where designing, building and installing undergoes precise operation. Where all the parties involved work in constant collaboration the livestock farm can exceed expectations. We are always available to adapt to the particular conditions each project, animal and farmer requires.
SPECIFICATION
| Model | Installation size | Nest/strip | Total nests | size of the nest | chicken/nest | Capacity/set |
|---|---|---|---|---|---|---|
| HT-L-A34 | 1.88m L*2.3mW*1.5m H | 4 | 24 | 0.47*0.34*0.38*0.33 m |
4 | 96 |
| HalfHT-L-A34(L) | 1.88m L*1.2mW*1.5m H | 4 | 12 | 4 | 48 | |
| HT-L-A44 | 1.88m L*2.4mW*1.95m H | 4 | 32 | 4 | 128 | |
| HT-L-A34(L) | 1.95m L*2.3mW*1.95m H | 4 | 24 | 0.49*0.38*0.38*0.33 m | 4 | 96 |
| HT-L-A44(L) | 1.95m L*2.4mW*1.95m H | 4 | 32 | 4 | 128 | |
| HT-L-A35(L) | 2.15m L*2.3mW*1.95m H | 5 | 30 | 0.49*0.38*0.38*0.33 m | 3-4 | 90-120 |
| HT-L-A45(L) | 2.15m L*2.4mW*1.95m H | 5 | 40 | 3-4 | 120-160 | |
| Note:If above size doesn't have the one you want,we can customize the cage size, if your order quantity is 20Gp or 40 HC container | ||||||
| Materials | Q235 Low carbon steel wire | |||||
| Surface Treatment | Cold galvanized(7-10 years) | |||||
| Hot dip galvanized(15-20 years) | ||||||
| Marine grade(15-20 years) | ||||||
| Package | Full container loading: cage and cage stand have no package, some fittings are in plastic bags and carton box | |||||
| Less container loading: packed in wooden box or pallet | ||||||
1.The triangular roof truss structure:The truss structure is welded with steel pipes, angle irons, square pipes, C-section steel, etc.
2.Primary Framing:Steel columns, roof beams, wind-resistant columns.
(1) Steel columns are steel structures’ prominent load-bearing structural members.
(2) Roof beams and steel columns form a load-bearing system.
(3) Wind-resistant columns transfer the loads on the gable roof on both sides to the entire system.
3.Secondary steel structure
Secondary steel mainly includes tie rods, horizontal roof bracing, wall bracing, roof purlin, and wall girt.
4.Roof and wall panels
Corrugated single color sheet, sandwich panel, color steel sheet with insulation cotton.
The thickness of the corrugated color sheet is 0.4mm, 0.5mm, 0.6mm.
The sandwich panel uses rock wool or polyurethane sandwich panel, and insulation cotton uses glass wool.
Manufacturing Construction
A feed tower is a storage device suitable for large and medium farms. The feeding equipment is provided at its outlet and has the function of regularly transporting feed to the piggery. Our common tower is composed of silo body, silo clamshell, ladder and column. The feed tower is not actually a cylinder, because the lower cone has a perspective hole, so you can observe the height of the feed in the bin.
Pan feeding system
Feed pan is ideal for whole raising period from brooding to slaughter.The suitable pan height is easy to get feed.360°feed distribution improve uniformity.Special designed feed cone with wings prevents feed waste.Adjustable feeding line of optional position for different period birds When cleaning,easy to lift.
Nipple drinker
Patent design double-sealed nipple drinkers with drip cups can prevent water leakage, then keep the padding feed dry and ensure the chicks’ health. Precision-machined Stainless steel stem and high quality PP shell , anti-corrosion.Two different specification can satisfy broiler and breeder’s normal water drinking.
Ventilation fan
The butterfly shutters make less air resistance,better sealing,easy to clean.The air leakage rate is about 75% less than ordinary shutter.Air volume is 15% higher than normal fan,thus less fans are requested.The frame dimension is the same as box fan.No additional work should be done for replacing old fans.
Poultry cages
Zinc-aluminium coating of all wire parts (cage fronts, bottom wires and lateral partitions) → 3 to 4 times better protection against corrosion compared to galvanized wire.Air duct for fresh air supply to the birds and for the production of dry manure (optional) → significantly reduced ammonia emissions.
Plastic slat
Special designed holes, keep slat clean and no-touch with birds.There is no blind angle, easy for cleaning,avoid insert problem. Comfortable and anti-skid slat,to increase fertilization rate.Smooth surface avoid damage to bird’s breast and feet.All parts made of high-strength engineering plastics,with reinforced treatment to get better wear-resistant.
Cooling system
Cooling system is designed with water reusing and automatic water replenishing device, Saving cost from investing in water reuse system for customer.Trough with flow leading plate,ensure a uniform soaking of pad,and get the best cooling effect.Easy replacement of cooling pad paper dismantable structure is convenience for cleaning water pipe.
Flexible tube lamp
The main cable runs through the entire house without any plug connections and thus ensures that the entire power remains in the main line.Retrofitting additional tube lamps at a later point is also very simple. Thanks to the plug & play principle, each LED tube can be installed individually in any place. In addition, all connections are completely waterproof.
Tube lamp channel
Channel allows to switch between warm white and red light or mixed light. This switch requires the same two-core ribbon cable that was already used in the past.Red light can be helpful to prevent feather pecking or cannibalism, especially when keeping layers in aviary systems.
Compact LED lamp
Compact LED lamp with an attractive price : performance ratio.Is a small LED lamp whose output is similar to that of a 25-watt bulb. eco standard produces a directed light beam, perfect to illuminate a feed pan, for example. The light from transparent is dispersed in all directions, making this lamp the ideal lighting solution for the area below the aviary.
Chicken Coop Interior
(1) We have a group of professional engineers, most of whom has more than 10 years experiences in architecture field. our company has got a various of experiences in design, manufacture, installation and so on. The work staff have excellent skills. Some of them had helped customers to install the warehouse around the world.
(2) We will offer one stop service. construction drawing,calculation sheet will be offered to help you get construction permit. Foundation design could be free made if you need. We could make 3D drawings to show the view. What’s more, Installation drawings will be offered and Steel structure column,beams will be marked number on it to help you install.
(3) We will send you extra bolts,purlins,panels incase any damage when install.
(4) Efficiency is our pursuit. Every inquiry ,emails will be replied immediately. Every questions will be paid high attention.
(5) We also have possessed more than 40 sets of large precise and domestically advanced processing equipments, including large gantry planing machines, automatic submerged arc welding machines, assembling machines, slitters, shot blasting machines and soon.
(6) We will offer details packing list for every container when load so it will be easier to unload.
(7) “Moral personality decides product quality.” is our guarantee to the products. “Customers come first.” is our everlasting pursuit. Believe your choose, we’ll give you a satisfied answer.
Other Products
Steel structure
Hot dip galvanized
Global "turnkey" solution
Steel Structure Pig House
Steel structure
Hot dip galvanized
Global "turnkey" solution
Steel Structure Cowshed
Take the next step
We have a passion for unconventional solutions that bring your vision to life.
Get in Touch
Dedicated to helping clients solve their most products challenging products and technology issues. Please complete the form below, and our sales team will be in touch with you shortly. Receive regular industry updates and product design tips straight to your inbox.
- +86 15563533037
- +86 15563533037
- +86 15563533037
- lottiechen@juhesteel.com